[STL] Gundam RX-78-2 Bust [Color Printed][Gumpla]

Printing settings sugestion:

• PLA
• Speed of 40~60mm/s
  body parts may use 100mm/s or more if your printer supports it.
• 0.2 layer height
• 15% infill for head parts
• 25% infill for body

It's possible to print without support, but I do recommend using supports.

It's also possible to print just the head for decoration.
Just print "yellow_neckBase" and follow instructions accordingly.

"Gundam", all associated names, images and trademarks are copyright of Sunrise Inc. and Bandai. No copyright infringement is intended.